EasyManuals Logo

Whirlpool WFW9290FC User Manual

Whirlpool WFW9290FC
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
8. Select CYCLE*
Turn cycle knob to select your wash cycle. See “Cycle Guide”
for details on cycle features.
The display will show the default settings for the selected
cycle. To adjust a setting, touch its name – Wash Temp, Spin,
Soil, or PreSoak. Adjusting settings will change the Estimated
Time Remaining. Tightly packing the load, unbalanced loads,
or excessive suds may also cause the washer to increase the
cycle time.
You can also adjust the detergent concentration and water
hardness settings, if needed. Default settings are 2x detergent
concentration and normal water hardness. If the detergent
concentration is not listed on the package, see “About
Detergent Concentration” to calculate the concentration.
To Adjust Dispenser Settings:
1. Touch DETERGENT CONCENTRATION until the desired
concentration appears on the time display.
2. Touch WATER HARDNESS until the desired water
hardness appears on the time display.
9. Adjust settings, if desired*
10. Select any additional options*
To add an option to the cycle, touch its name – Steam Clean,
EcoBoost
, FanFresh
®
, Extra Rinse, Cycle Signal, or Control
Lock. To remove an option from the selected cycle, touch the
option again.
11. Setting a delayed wash
If you do not want to begin a cycle immediately, you may
choose the Delay Wash option. This will delay the start
of the wash cycle by up to 8 to 12 hours, depending on
your model.
To set a Delayed Start:
1.
Touch ADJUST DELAY TIME + or – to set the desired
delay time.
2.
Touch START to start the delay countdown. The countdown
stops blinking.
* Not all options and settings are available with all cycles.
See “Cycle Guide” for available options and settings.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Whirlpool WFW9290FC and is the answer not in the manual?

Whirlpool WFW9290FC Specifications

General IconGeneral
Stylefront load
Colorsilver, chrome shadow
Washer Capacity4.2 cubic feet
Max Spin Speed1200 revolutions per minute
Spin Speeds5
Number of Cycles12
Cycle Selectionsnormal, whites, heavy duty, towels, colorlast, sanitize, clean washer with affresh, drain & spin, wash & dry, quick wash, delicates, cold wash
Optionspresoak, steam clean, ecoboost, extra rinse, fanfresh, control lock
Noise levelno
Temperature Settings5
Temperature Selectionscold, cool, warm, hot, extra hot
Soil Levelsextra heavy, heavy, normal, light
Internal Heateryes
Delay Start / Endyes
Child Lockno
Cycle Signalyes
Steamno
Smart Homeno
Annual Energy Consumption66 kilowatt hours
Voltage120 volts
Weight and Dimensions IconWeight and Dimensions
Depth31.25 inches
Height39.75 inches
Width27 inches
Net Weight235 pounds

Related product manuals