Whirlpool WHB36S - User Manual

Other manuals for Whirlpool WHB36S

Use And Care Guide9 pages

Need help?

Do you have a question about the Whirlpool WHB36S and is the answer not in the manual?

Summary

Beverage Center Safety

General Safety Instructions

General safety precautions for electrical appliances.

California Proposition 65 Warnings

Warnings about chemicals in the product as per California law.

Cleaning and Maintenance

Interior & Exterior Cleaning

Instructions for cleaning the interior and exterior surfaces of the appliance.

Door Gasket Cleaning

Procedure for cleaning the door gasket to ensure a proper seal.

Vacation and Moving Care

Vacation Preparation Steps

Steps to take if turning off the beverage center before leaving for a vacation.

Moving Preparation Steps

Steps to prepare the appliance for safe transport to a new location.

Customer Assistance & Support

Ordering Replacement Parts

Guidance on how to obtain factory-specified replacement parts.

Summary

Beverage Center Safety

General Safety Instructions

General safety precautions for electrical appliances.

California Proposition 65 Warnings

Warnings about chemicals in the product as per California law.

Cleaning and Maintenance

Interior & Exterior Cleaning

Instructions for cleaning the interior and exterior surfaces of the appliance.

Door Gasket Cleaning

Procedure for cleaning the door gasket to ensure a proper seal.

Vacation and Moving Care

Vacation Preparation Steps

Steps to take if turning off the beverage center before leaving for a vacation.

Moving Preparation Steps

Steps to prepare the appliance for safe transport to a new location.

Customer Assistance & Support

Ordering Replacement Parts

Guidance on how to obtain factory-specified replacement parts.

This document is a Use & Care Guide for the Whirlpool Beverage Center, models WHB36S and WHB36S2CS. It provides comprehensive information on the appliance's function, installation, operation, maintenance, and troubleshooting.

Function Description

The Whirlpool Beverage Center is designed to store beverages in a controlled environment. It functions as a freestanding unit, maintaining a set temperature to keep drinks cool. The appliance is equipped with an electronic control panel for adjusting the internal temperature. Its primary purpose is to provide convenient and efficient storage for a variety of canned beverages.

Important Technical Specifications

The manual details several key technical specifications for the WHB36S model:

Model: WHB36S
Climate Class: N
Electric Shock Protection Type: I
Capacity: 3.6 cu.ft
Voltage: 120 V
Frequency: 60 Hz
Current: 0.95 A
Voice (Noise Level): ≤42 dB(A)
Energy Consumption: 0.82 kw.h/24h
Refrigerant: R600a/1.06oz (flammable)
Net Weight: 63.93 lbs
Interior Temperature Range: 37~60 °F
Dimensions (in inches):
- Width: 18.89
- Depth: 18.70
- Height: 33.46

The maximum capacity for the WHB36S model is 90 cans (335ml) when laid vertically. The manual provides specific instructions for arranging cans to achieve this maximum capacity: 25 cans in each of the top 3 racks (five cans per row, five cans per column) and 15 cans in the bottom rack (five cans per row, three cans per column, one can high). Beverages should only be stored in sealed cans.

Usage Features

The beverage center is designed for user-friendly operation with several features:

Temperature Control: The appliance features an electronic control panel with up and down arrows to adjust the temperature. Each press of the up arrow increases the temperature by 1°F, and each press of the down arrow decreases it by 1°F. The new desired temperature flashes on the display before switching back to the actual temperature, which gradually adjusts to the set point.
Freestanding Installation: The unit is intended to be freestanding and should not be built-in or placed in a recessed area. It requires a minimum clearance of 4 inches on each side, top, and back for proper air circulation.
Leveling Legs: Adjustable leveling legs on the front corners allow users to raise or lower the appliance. It is recommended to slightly slope the appliance backward to ensure the door closes tightly.
Door Reversibility: The door can be reversed to open from either the left or right side, offering flexibility in placement. The manual provides detailed step-by-step instructions for reversing the door, including removing hinges, plugs, and leveling legs, and then reassembling them on the opposite side. It is crucial not to tilt the appliance over 45° during this process to prevent damage to the sealed system.
Power Failure Resilience: In the event of a power failure, the beverage center can store beverages for several hours. Users are advised not to add more beverages or open the door during an outage. The unit should be unplugged and reconnected once power is restored.
Safety Precautions: The manual emphasizes several safety warnings, including the risk of suffocation if the door is not removed from old appliances, the importance of proper grounding to prevent electrical shock, and the use of nonflammable cleaners for maintenance to avoid explosion hazards. The refrigerant R600a is flammable, so care must be taken not to damage the cooling system during transport and installation.

Maintenance Features

Regular maintenance is crucial for the longevity and proper functioning of the beverage center:

Cleaning the Interior: The interior should be cleaned with a mixture of warm water and baking soda (1-2 tablespoons per quart of water). A sponge or soft cloth should be used, ensuring excess moisture is wrung out before cleaning around the controls. After cleaning, rinse thoroughly with warm water and dry with a clean, soft cloth.
Cleaning the Exterior: The exterior surface can be cleaned using warm water and a mild detergent. It should then be rinsed thoroughly and dried with a clean, soft cloth.
Door Gasket Maintenance: The door gasket must be kept clean to ensure a proper seal. Frequent cleaning using the method described for the interior is recommended.
Vacation and Moving Care: For extended periods away, users should remove all open beverages, unplug the unit, and clean it thoroughly. When moving, all beverage bottles should be removed, the unit unplugged and cleaned, and all removable parts wrapped and taped to prevent shifting. The doors should also be taped shut, and the power cord secured.
Troubleshooting: The manual includes a comprehensive troubleshooting guide to help users diagnose and resolve common issues such as the unit not operating, appearing too warm, or exhibiting unusual noise. This section provides possible causes and recommended solutions, advising users to contact customer service if problems persist.

The manual also highlights normal operating conditions, such as the sound of refrigerant flow and the warming of the appliance's sides due to the cooling function. It stresses the importance of reducing the frequency of door openings to lower power consumption.