er and replace the light with a screwing light (120V/10W).
1110
Top hinge cover
1
Top hinge screw
2
Top hinge
3
Cabinet plug
4
Bottom hinge
5
Bottom hinge screw
6
Leveling leg
7
Uninstall the cov
Refer to the illustrations and instructions below:
1. Move the lamp cover 1.2~2" (3.05-5.08cm) according to arrow point direction.
2. Take out the lamp cover.
3. Rotate and take out the bulb in counterclockwise direction.
4. Replace bulb and reinstall lamp cover.
NOTE:
Do not tilt the appliance over 45 degree when reversing the door
as possible damage to the sealed system may occur.
To Next Page