How to reset water filter alarm on Whirlpool WSE 2930 W Refrigerator?
To reset the water filter alarm on your Whirlpool Refrigerator, press the reset button for 3 seconds. A buzzer should sound once to confirm the reset.
How to reset water filter indicator on Whirlpool WSE 2930 W Refrigerator?
To perform a Water Filter Indicator Factory/Service reset on your Whirlpool Refrigerator, press the water valve shaft switch 4 times consecutively within 10 seconds.
How to reset air filter alarm on Whirlpool WSE 2930 W?
To reset the air filter alarm on your Whirlpool Refrigerator, press the reset button for 3 seconds. A single buzzer sound will confirm the alarm has been reset.
How to turn off freezer door alarm on Whirlpool WSE 2930 W Refrigerator?
To stop the freezer door alarm on your Whirlpool Refrigerator, press the reset button.
How to turn off refrigerator door alarm on Whirlpool WSE 2930 W?
To stop the refrigerator door alarm on your Whirlpool Refrigerator, press the reset button.
How to reset over temperature alarm on Whirlpool Refrigerator?
To reset the over temperature alarm and stop the buzzer on your Whirlpool Refrigerator, press the reset button.
How to reset long black out alarm on Whirlpool Refrigerator?
To reset the long black out alarm and stop the buzzer on your Whirlpool Refrigerator, press the reset button.
How to reset antibacterial filter indicator on Whirlpool Refrigerator?
To perform an Antibacterial Filter Indicator Factory/Service reset on your Whirlpool Refrigerator, press the refrigerator compartment door switch 4 times consecutively within 10 seconds.
What causes compatibility failure in Whirlpool Refrigerator?
A compatibility failure on your Whirlpool Refrigerator means the User Interface board isn't recognizing the code sent by the Main Control board.
Why is there a board failure in Whirlpool WSE 2930 W Refrigerator?
A board failure in your Whirlpool Refrigerator indicates that the User Interface Board did not pass the factory test.
Explanation of the unit's temperature regulation mechanism.
Detailed explanation of the main electronic control board.
Function and operation of the refrigerator compartment temperature sensor.
Mechanism and operation of the air damper controlling airflow.
Function and operation of the freezer compartment temperature sensor.
Procedures for handling NTC sensor failures.
Detailed explanation of the automatic defrost cycle process.
Explanation of error codes related to main and user interface boards.
Procedure for performing a self-test on the user interface board.
Overview of all possible alarms, their indicators, and reset methods.
Summary table of failure codes and their descriptions.
Steps to enter and perform built-in diagnostic tests.
Summary of built-in test operations and their corresponding codes.
Summary of error codes encountered during built-in tests.
Procedure to reset water and antibacterial filter indicators.
Technical specifications and connector details for the main board.
Technical specifications for the user interface panel.
Technical specifications for the dispenser's stepper motor.
Technical specifications for the IDI 2 ice maker motor.
Technical specifications for the defrost heater.
Technical specifications for condenser and evaporator fans.
General| Brand | Whirlpool |
|---|---|
| Model | WSE 2930 W |
| Category | Refrigerator |
| Freezer Position | Top |
| Star Rating | 3 Star |
| Defrost System | Manual |
| Color | White |
| Shelves | 3 |
| Width | 600 mm |
| Height | 1850 mm |
| Depth | 650 mm |
| Capacity | 290 liters |
To Next Page