Whirlpool WSF7256 IX - Activation of the “Built-In” Test Routine

Troubleshooting
Activation of the “Built-In” Test Routine
The freezer display
indicates the process
- Check
evaporator fan)
The fridge display
indicates the
failure code.

standing for
everything is ok!
All the error codes will be displayed on the fridge display. Every check have the related error code,
that shall be the same as the sequence number foreseen during the test.
If 2 or more error codes have been recognized, these codes shall be displayed on the fridge display
-
!
For all Side by Side appliance range 2008 is the same Test routine for the main board and user
interface like last year available. The Built-In test allows the technician to check important
components which are listed in the following tables.