EasyManua.ls Logo

Whirlpool WTW5000DW1 - Rinse Cycle Explanation; Spin Cycle Explanation; Cycle Completion (Done); Lid Lock Feature

Whirlpool WTW5000DW1
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
RINSE
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load. You may hear the
motor turning on briey (short hum) to move the basket
while lling.
SPIN
The washer spins the load at increasing speeds for proper
water removal, based on the selected cycle and spin
speed.
DONE
Once the cycle is complete, this light will come on. For
best results, promptly remove the load.
LOCKED
The Lock feature allows for higher spin
speeds. When lit, the lid is locked and
cannot be opened without pausing the
cycle. When the light is off, the lid can be
opened.
To open the lid after it has been locked,
press START/Pause. The lid will unlock
once the washer movement has stopped.
This may take several minutes if the load
was spinning at high speed. Press START/
Pause while the lid is closed to resume the
cycle.

Related product manuals