Whirlpool WTW8900BC - User Manual

Questions and Answers

L
linjamesSep 6, 2025
Why is the dispenser not working correctly in my Whirlpool Washer?
- R
  Richard JonesSep 6, 2025
  If the dispenser in your Whirlpool washer is not working correctly, avoid overfilling it, as this causes immediate dispensing. Always select the Fabric Softener option to assure proper dispensing and load dispensers before starting a cycle. Note that small amounts of water may remain in the dispenser at the end of the cycle, which is normal. If you have low water pressure, you may notice residual powder in the dispenser; selecting a warmer wash temperature might help, depending on your load.
J
John BakerAug 22, 2025
Why won't my Whirlpool Washer run or fill with water?
- K
  Kevin CarterAug 22, 2025
  Several factors can prevent your Whirlpool washer from running or filling. Ensure the power cord is plugged into a grounded 3-prong outlet and avoid using an extension cord. Also, make sure there is power to the outlet, and reset any tripped circuit breakers or replace blown fuses. The lid must be closed for the washer to operate. The washer will pause during certain cycles; do not interrupt it. It may also stop to reduce suds. If the washer is tightly packed, remove some items and rearrange the load evenly around the washplate, ensuring garments are not directly over the center. After starting, add only one or two additional garments, and do not add extra water.
C
cclineSep 3, 2025
What causes fabric damage in my Whirlpool WTW8900BC?
- H
  hughesangelaSep 3, 2025
  Fabric damage in your Whirlpool washer can be caused by sharp items in pockets during the wash cycle; empty pockets, zip zippers, and snap or hook fasteners before washing. Strings and straps can tangle, so tie them before starting the wash. Mend any rips and broken threads in seams beforehand. Avoid tightly packing the load; instead, load garments in loose heaps evenly around the washplate to allow items to move freely during the wash. Use the cycle designed for the fabrics being washed, and add only one or two additional garments after the washer has started.
B
Billy GrantSep 2, 2025
Why are the wash or rinse temperatures incorrect in my Whirlpool WTW8900BC Washer?
- W
  William AtkinsSep 2, 2025
  Incorrect wash or rinse temperatures in your Whirlpool washer can be due to several reasons. Check that the hot and cold inlet hoses are not reversed and that both hoses are attached to both the washer and faucet, with both hot and cold water flowing to the inlet valve. Also, ensure that the inlet valve screens are not clogged and that there are no kinks in the hoses. Note that ENERGY STAR® qualified washers use cooler wash and rinse water temperatures than traditional top-load washers, including cooler hot and warm washes.
A
Amy CisnerosSep 1, 2025
Why is my Whirlpool Washer not cleaning or removing stains effectively?
- J
  James HallSep 1, 2025
  If your Whirlpool washer isn't cleaning or removing stains well, it may be due to the wash load not being completely covered in water, which is normal as the washer senses load size and adds the correct amount. Avoid adding more water, as this can lift garments off the washplate, reducing cleaning effectiveness. Ensure you load garments in loose heaps evenly around the washplate and only add one or two additional garments after the washer has started.
J
Jennifer StewartAug 30, 2025
Why is my Whirlpool WTW8900BC Washer load not rinsed properly?
- B
  benjaminandersonAug 30, 2025
  Several factors can cause a Whirlpool washer load to not rinse correctly. First, ensure both hot and cold inlet hoses are correctly attached and not reversed, with water flowing to the inlet valve, and that both hot and cold water faucets are turned on. Check that the inlet valve screens are not clogged and that there are no kinks in the inlet hose. Using regular detergent or too much HE detergent can also cause issues; use only HE detergent and measure correctly based on load size and soil level. A tightly packed washer is less efficient at rinsing, so load garments in loose heaps evenly around the washplate, avoiding placing them directly over the center. Also, use a cycle designed for the fabrics being washed and add only one or two additional garments after the washer has started.
M
Matthew BautistaAug 29, 2025
What to do if single-dose laundry packet is not dissolving in my Whirlpool WTW8900BC Washer?
- I
  ihoweAug 29, 2025
  Be sure to add the laundry packet to the washer basket before adding clothes. Follow the manufacturer’s instructions to avoid damage to your garments.
J
Jeanne SchmidtAug 27, 2025
What to do if there is sand, pet hair, lint, etc. on load after washing in my Whirlpool WTW8900BC?
- A
  Audrey RoweAug 28, 2025
  If you find sand, pet hair, lint, or detergent/bleach residues on your load after washing in your Whirlpool washer, it may require additional rinsing. Add an Extra Rinse to the selected cycle.
J
Jane DickersonAug 27, 2025
How to get rid of odors in my Whirlpool WTW8900BC Washer?
- T
  Tyler MontgomeryAug 27, 2025
  To eliminate odors in your Whirlpool washer, run the Clean Washer with affresh® cycle after every 30 washes. Also, unload the washer as soon as the cycle is complete.
D
dhortonAug 25, 2025
What does the Sd (Excess suds) error code mean on my Whirlpool WTW8900BC?
- F
  fernandezjohnAug 26, 2025
  The "Sd" error code on your Whirlpool washer indicates excessive suds. The washer is running a suds reduction routine. Allow the washer to continue. Use only HE detergent, measuring the amount based on load size and following the detergent manufacturer’s instructions. If the dial is flashing, reselect your desired cycle using a cold wash temperature, and press START/PAUSE without adding detergent.

Summary

Washer Safety

Safety Alert Symbols and Warnings

Explains DANGER and WARNING symbols and safety alert messages.

Important Safety Instructions

Key precautions to reduce fire, electric shock, or injury risks during washer use.

Control Panel and Features

Power and Cycle Selection Controls

Details the Power button, Wash Cycle knob, and Start/Pause button functions.

Cycle Options Overview

Introduces various cycle options like EcoBoost, Extra Rinse, Deep Clean, Dispensers, and Cycle Signal.

Cycle Settings and Modifiers

Adjusting Soil Level, Spin Speed, and Wash Temp

Explains how to modify wash time, spin speed, and water temperature for optimal results.

Detergent and Additive Dispensers

Describes the HE detergent, bleach/Oxi, and fabric softener dispensers and their usage.

Cycle Guide

Using Your Washer

General Washer Safety Warnings

Covers fire hazard from flammable fluids and electrical shock hazards.

Loading the Washer Correctly

Starting and Pausing the Washer

Selecting Additional Cycle Options

Laundry Preparation and Sorting

Adding Detergents and Additives

Selecting and Customizing Cycles

Guide on choosing cycles and adjusting modifiers like wash temp, soil level, and spin speed.

Starting and Managing the Wash Cycle

Adding Laundry Products

Troubleshooting

Vibration, Rocking, or Walking Issues

Washer Not Running or Filling

Troubleshooting steps for when the washer won't start, won't fill, or stops mid-cycle.

Odors and Fabric Damage

Draining and Spinning Problems

Solutions for issues with the washer not draining or spinning loads properly.

Stain, Lint, and Tangling Problems

Display Error Codes

Explains common error codes displayed by the washer and their solutions.

Water Leak Causes and Solutions

Washer Performance Issues

Diagnoses and solutions for common problems like insufficient water or stopped operation.

Whirlpool Corporation Laundry Limited Warranty

Warranty Coverage and Exclusions

Whirlpool WTW8900BC Specifications

General

Capacity	5.3 cu. ft.
Control Type	Electronic
Water Level Selector	Automatic
Spin Speed	1, 100 RPM
Energy Star Certified	Yes
Steam Function	Yes
Voltage	120V
Smart Features	WiFi Connected
Width	27 in