Page 24 | 1-800-343-9463
CWSK.PS4000.B
082015
Secure the two white wires from the unit and the white
wire from the transformer into a lever connector.
Locate the blue wire coming out of the Molex connector.
Cut the blue wire and strip each end to a length of 3/8”.
Secure the blue wires from the unit and the black wire
from the transformer into a lever connector.
Secure one of the t-stat wires and the blue wire coming
from the 24v side of the transformer into a lever
connector.
14
15
16
17
To Next Page
Loading...
