Why does my Whistler D11VR Dash Cameras have cross stripe interference in the image?
If you're seeing cross stripe interference in your Whistler Dash Cameras' image, it's likely due to an incorrect “Light Frequency“ setting. To fix this, check the setting for 50Hz or 60Hz in the MENU Settings and adjust accordingly.
What to do if my Whistler D11VR record a black image when recording the sky or water?
If your Whistler Dash Cameras unit shows a black image when recording sky or water, you should adjust the Exposure setting in the Global menu settings to correct the image.
Why are the videos or photos from my Whistler Dash Cameras unclear?
If your Whistler Dash Cameras is showing video or photo that is unclear, examine the lens for any obstructions like fingerprints or protective film. Clean the lens with a soft cloth.
What to do if “files error” appears during replay on Whistler Dash Cameras?
If you see a “files error” appear during replay on your Whistler Dash Cameras, it indicates uncompleted files due to a microSD card storage error. Try reformatting or replacing the card.
What to do if my Whistler D11VR Dash Cameras unit doesn’t work with my SD Card?
If your Whistler Dash Cameras doesn’t work with your SD Card, first remove the SD card and reinsert it. If the device still doesn't recognize the card, the SD card may be damaged, or the device might not support that type of memory card. Try using a different memory card.
General| Brand | Whistler |
|---|---|
| Model | D11VR |
| Category | Dash Cameras |
| Language | English |
To Next Page
