OPERATIONS
8
Power Connection in Vehicle
1. Plug the USB end of the vehicle power cord into the USB
jack of the DVR.
2. Insert the other end of the power cord into the vehicle’s
lighter socket/power port.
NOTE: Unit will automatically turn on and start recording
when power is applied. It will turn o when power is removed.
Power ON/OFF
Power On: Press
to turn on DVR. Blue Status LED
illuminates.
Power O: Press and hold
until the Whistler screen
appears.
NOTE: The D17VR will automatically power OFF after the
low battery warning is displayed.
STEP 1
STEP 2
OPERATIONS
9
Shooting or Review a Video or Image
Shooting - Video
1. Power on: Press to turn on DVR.
2. Record Video: Press
OK
to start recording. Rec icon
(red dot) is shown in the top left corner. Press
OK
again to stop.
Shooting - Image
1. Take Picture: Press MODE button. Camera icon
will
be displayed in upper left corner.
2. Press
OK
to take an image.
SD
To Next Page
Loading...
Need help?
General
