•
Feed front bolt rope though the track under the main beam (1)
• Place the trampoline rod though the back of the trampoline (this will be used to help tighten the trampoline) (2)
• Feed both side bolt ropes down the side tracks, pulling each side a few inches at a time. (3)
• Feed the trampoline lacing strip though the track under the rear beam (5)
• Use trampoline line to tighten the two together (7)
•
Feed rope though the eye around the rod (use a fid to help with this) and back though the same eye and move along to the next eyelet (6)
• The tighter the better, this will help to create a stiffer platform.
Trampoline
1
1 2
765
43
8
To Next Page
Loading...