White OMEW Series - Table 1 Differences between OMEW Series

7
WHITE can accept no responsibility for possible errors in catalogues, brochures, and other printed material. WHITE reserves the right to alter its products without noce. This also applies to products already on
order provided that such alteraons can be made without subsequent changes being necessary in specicaons already agreed.
All trademarks in this material are the property of the respecve companies. WHITE and the WHITE logotype are trademarks of WHITE Drive Motors & Steering LLC and WHITE Drive Motors and Steering Sp. z o.o..
All rights reserved.
Item
Description
OMEW
Series 0
Series 1
Series 2
Metric version
SAE version
SAE version
Metric version
SAE version
Standard
Standard
Low speed
version
Standard
Standard
Low speed
version
11
Shaft metric tap 35 mm Parallel key
X
X
Shaft SAE tap 1 ¼ in Parallel key
X
Shaft SAE tap 1 ¼ in Woodruff key
X
X
X
15
Disc valve, standard
X
X
X
X
Disc valve, LS version 160 - 400 cm
3
X
X
18
Distributor plate for M8 screws
X
X
Distributor plate for M8 screws and LS-
version 160 – 400 m
3
X
Distributor plate for M10 screws
X
X
Distributor plate for M10 screws and
LS-version 160 - 400 m
3
X
20
O-ring 90 • 2
X
X
X
O-ring 92.6 • 2
X
X
X
21
Gearwheel set for M8 screws
X
X
X
Gearwheel set for M10 screws
X
X
X
22
End cover for M8
X
X
X
End cover for M10
X
X
X
24
Washer 8.2 • 15.2 • 2
X
X
X
Washer 10.5 • 20 • 2
X
X
X
25
Screws M8
X
X
X
Screws M10
X
X
X
Table 1 Differences between OMEW Series