Need help?Do you have a question about the White S4A and is the answer not in the manual?
General| Brand | White |
|---|---|
| Model | S4A |
| Category | Water Pump |
| Language | English |
Conditions for borehole submersible pump installation and White International's responsibilities.
Crucial advice for pump installation to prevent damage and ensure proper operation.
Guidance on placing the pump at the correct depth to avoid damage and ensure optimal performance.
Advice on cable selection to prevent motor failure and warranty voidance.
Technical specifications for 240V PSC motors including amps, ohms, and capacitor ratings.
Technical specifications for 415V motors including amps, ohms, and related data.
Instructions on how to start the pump gradually to avoid issues with solids and turbulence.
Warning against sudden valve opening to prevent sand disturbance and shock pressures.
Precautions regarding pressure tank over-pressurization and correct switch selection.
Common causes for overload protector trips in submersible pumps.
Potential reasons for a complete lack of water delivery from the pump.
Factors contributing to reduced water output from the pump.
Issues causing the pump to fail to stop operating correctly.
Causes for frequent cycling of the pump, impacting its lifespan.
Reasons for fuse failure without the overload protector activating.
Potential causes for electric shock when in contact with water pipes.
Explanation for fluctuating pressure gauge readings and surging flow, known as 'snoring'.
Causes and identification of electrolysis affecting the motor and pump.
Step-by-step guide for disassembling the pump components.
Guide on reassembling the pump stages, ensuring correct alignment and fitting.
To Next Page