Whites Coinmaster 2/DB series 2 - User Manual

Adjusts the detector for its threshold tone with just one turn.

Allows distinguishing between 'junk' and 'good' targets, and canceling ground effects.

Serves as the ON/OFF switch and sets the audio output level.

Used for tuning to threshold and acts as a memory for retuning.

Registers signal strength from the loop, aiding in pinpointing.

Adjusts the detector for its threshold tone with just one turn.

Expanded range allows distinguishing between 'junk' and 'good' targets.

Serves as the ON/OFF switch and sets the audio output level.

Variable control to minimize the effects of mineralization in the ground.

Used for tuning to threshold and acts as a memory for retuning.

Focuses on coinshooting, highlighting the detector's suitability for this activity.

Guide to searching areas for relics and historically valuable objects.

Explains five factors determining how deep the detector can find objects.

Lists conductive objects detectable and non-metallic objects that are not.

Learn to interpret different tone responses to distinguish 'good' and 'junk' items.

Details 'Quiet Zone' and 'Scrub' techniques for handling mineralization.

Instructions for cleaning the detector, noting waterproof parts and case.

Precautions for protecting the detector from extreme weather conditions.

Guidelines for rinsing the detector after exposure to corrosive salt water.

General precautions including avoiding drops, WD-40, and sharp impacts.

Proper procedure for storing the detector for extended periods.

Tips for resolving common operational issues and difficulties with the detector.

Information on how to get the detector serviced and details on warranty.