Whites Coinmaster 6000/D - User Manual

Controls detector on/off, selects SAT, and tests battery strength.

Sets the detector's threshold, indicated by a barely heard audio tone.

Controls the maximum level of the audio tone; recommended at maximum.

Selects one of the detector's 4 operating modes for specific search conditions.

Locates all metals, neutralizes mineralization; good for low junk areas.

Distinguishes desirable/undesirable objects, neutralizes mineralization; for high junk areas.

Discriminating, but does not neutralize mineralization; for low mineralization areas.

Locates all metals, neutralizes mineralization; for deep targets in low junk areas.

Ground Exclusion Balance; neutralizes ground mineralization for all GEB modes.

Discrimination control; audibly distinguishes desirable/undesirable targets.

Changes detector operating systems; retunes threshold and changes modes.

Registers signal intensity and battery strength; indicates depth on 6000/D.

Techniques for accurately locating detected targets using signal characteristics.

Method to help pinpoint targets by switching to GEB NORM or GEB MAX mode.

Method for reading target depth using the meter needle on 6000/D models.

Details on using four ALKALINE batteries, recommended for the instrument.

Information on rechargeable NICKEL CADMIUM batteries and charging procedures.

Instructions for plugging in and charging the battery pack.

Safety warnings regarding battery charging, handling, and disposal.

Guidelines for cleaning the instrument, including waterproof parts and case.

Precautions for protecting the detector from extreme cold, heat, and moisture.

Specific instructions for rinsing and cleaning the detector after salt water exposure.

General advice to avoid dropping, using lubricants, or altering the detector.

Information on factory-authorized service centers and warranty repairs.

Details on the two-year warranty, exclusions, and required return procedures.

Guidelines for responsible digging practices, hole size, and refilling.

Advice on minimizing environmental impact and maintaining positive public perception.