Whites Coinmaster classic III User Manual

Schedule for rotating batteries to ensure maximum battery life and performance.

Controls the detector ON/OFF and selects the degree of sensitivity for instrument response.

Controls the amount of rejection against junk metals, allowing selection between Ring Range and Coin Range.

Allows switching between operating modes: DISC, LOCK for all metals, and RESET for circuit readjustment.

Explains headphone compatibility, connection, and benefits like increased battery life and hearing ability.

Proper techniques for sweeping the loop close to the ground, keeping it flat and overlapping passes for effective detection.

Covering areas twice at 90-degree angles and pinpointing targets using cross-sweeping for accurate location.

Proper methods for cleaning, protecting from weather, and handling saltwater exposure to maintain the detector.

Guidelines for instrument storage, safety precautions, and procedures for obtaining service or repairs.

Procedure for adjusting ground rejection to improve performance in various ground conditions and minimize false targeting.

Steps to tune the discrimination control using nickel and pulltab settings for identifying junk versus valuable metals.