Whites Eagle Spectrum - User Manual

Step-by-step guide for putting the metal detector together.

Details on standard and rechargeable batteries, including charging procedures.

Important safety advice, storage, and precautions for battery use.

First-time operation, power-on sequence, and opening display information.

Introduction to the different pre-configured programs for various detection scenarios.

Guidance on proper loop movement, sweep patterns, and listening for target signals.

Understanding VDI numbers, Spectrum graph patterns, and reading target indicators.

Methods for accurately locating the precise position of detected targets.

Controlling audio output, background hum, and target pitch for clarity.

Configuring target rejection, silent operation, and detector responsiveness.

Tuning detector responsiveness for motion and non-motion modes.

Advanced audio settings (S.A.T., Tone ID) and ground balancing (Autotrac, Manual).

Fine-tuning target rejection (Edit, Block Edit) and visual output (Visual Disc, Labels).

Adjusting transmit power, frequency, preamp gain, and graph display behavior (Accumulate, Fade).

Overview of default settings for Coin & Jewelry, Jewelry & Beach, Relic, and Prospecting programs.

Instructions for saving and loading personalized detector settings.

Fields for logging serial number, date code, purchase date, and dealer information.

Details on the limited warranty, transfer process, and authorized service.