To Next PageTo Next Page
Need help?Do you have a question about the Whites GMT and is the answer not in the manual?
Step-by-step instructions for putting together the metal detector components.
Details about the standard battery compartment and its capacity.
Instructions for inserting and managing standard batteries.
Information on using optional rechargeable battery systems.
How to test the detector's battery level and status.
Essential steps for immediate detector operation and initial tuning.
Description of the gain control and its function as a power switch.
How to adjust the gain for optimal signal strength and depth.
Further details on gain adjustment to avoid overload and ensure smooth operation.
Explanation of the audio boost feature for enhanced target detection.
Understanding the Variable Self Adjusting Threshold speed control.
How to adjust VSAT for smooth threshold and minimize interference.
Identifying and dealing with mineralized rocks that cause false signals.
How to use the trigger for Iron Identification and Target Analysis.
Practical advice and observations on the Iron ID system's performance.
Setting the background audio threshold for target detection.
Steps for precisely adjusting the threshold for optimal listening.
Understanding the detector's ground balancing capabilities.
Using the automatic ground tracking feature for mineralization.
Detailed steps for manual ground balance calibration.
Techniques for manually tuning the ground balance for specific conditions.
Methods for accurately locating buried targets.
Recommendations for headphone use to improve detection and save battery.
Practical advice for using the detector in various field conditions.
Specific tuning for detecting tiny gold flakes using manual GB.
An initial strategy of digging all targets to learn detector responses.
Understanding and correcting over-adjustment during manual ground balance.
An alternative method for achieving perfect ground balance.
Troubleshooting challenges with very low ground mineralization.
Identifying and managing signals from mineralized rocks.
Understanding and identifying negative hot rocks in the field.
Dealing with positive hot rocks and challenging alkalai soils.
Tuning gain settings in conjunction with the Fast AutoTrac feature.
Detailed techniques for precisely locating targets using cross-sweeping.
A method for target verification using a soil sample.
How Gain and VSAT speed settings influence each other for optimal performance.
Understanding how certain iron types might be misclassified by the ID system.
Interpreting the Iron Probability bar graph for target identification.
Understanding and responding to overload messages from the detector.
Advanced tips and tricks for using the VSAT feature effectively.
Guidelines for cleaning and maintaining the detector's components.
Recommendations for protecting the detector from environmental conditions.
Proper procedures for storing the detector when not in use.
Important safety and operational precautions to follow.
Information on authorized service centers and repair procedures.
Instructions on how to properly prepare and ship the detector for service.
Details of the manufacturer's warranty coverage and limitations.
Procedure for transferring the detector's warranty to a new owner.
Information about an available video cassette for learning detector use.
Section for recording personal purchase and detector details.
General| Brand | Whites |
|---|---|
| Model | GMT |
| Category | Metal Detector |
| Language | English |
