Whyte 905 - Tools & Spares for Maintenance

P
age 34
General Instruction Manual
R
ecommended tools & spares for regular maintenance:
◊ Torque wrenches with lb•in or Nm gradations from 3 Nm to 15 Nm and also from
10 to 60 Nm (Nm = Newton Metres). Plus 2, 2.5, 4, 5, 6, 8 & 10mm hexagonal
inserts.
◊ High pressure low volume air pump (for rear shock or suspension fork).
◊ 2, 2.5, 4, 5, 6, 8 & 10 mm allen keys.
◊ T25 & T10 Torx key.
◊ 8, 10 & 15mm open-end spanners.
◊ No. 1 Phillips head screwdriver.
◊ Bicycle chain splitter tool.
◊ Bicycle tyre levers.
◊ Bicycle tyre pump with pressure gauge.
◊ Bicycle spoke key.
◊ Spare bicycle inner tubes* & tyres*.
◊ Spare brake pads / blocks*.
◊ Spare “Power-link” chain link**.
◊ Spare control cables.
◊ Synthetic bicycle chain lube.
◊ Synthetic bicycle grease.
◊ Frame polishing protectant.
* These spares are specific to the specification of your bicycle, make sure you order
the correct size & specification of replacements, manufactured by the original equip-
ment manufacturer.
** Check compatibility prior to purchasing.