Need help?Do you have a question about the WIA weldmatic 500i CP140-2 and is the answer not in the manual?
Mandatory eye protection specifications and usage for welding operations to prevent injury.
Specifics on power supply cable, plug, and circuit breaker ratings for 350i and 500i models.
Checks and maintenance for feed rolls, gun cable liner, welding tip, and wire condition.
Steps to diagnose and resolve problems with no output or low weld output from the power source.
Troubleshooting common causes of poor welding results, such as erratic wirefeed and porosity.
General| Output Current | 500A |
|---|---|
| Protection Class | IP23 |
| Input Voltage | 400V |
| Output Current Range | 500A |
| Duty Cycle | 60% @ 500A |
| Welding Process | MIG |
| Power Supply | Inverter |
To Next Page
