Need help?Do you have a question about the WIA WELDARC 200AC/DC and is the answer not in the manual?
Protects eyes from radiant energy and flying metal during welding, cutting, and chipping.
Explains Manual Metal Arc Welding process and electrode usage.
Check shipment for completeness and damage; notify supplier if issues found.
Details output current, voltage, and duty cycle for Stick and TIG modes.
Describes the LCD screen, buttons, and rotary knob for machine operation.
Details the DC Stick mode for MMA welding with electrode holder.
Explains DC TIG, DC Pulse, AC TIG, and AC Pulse modes.
Details how to adjust Weld Current on the TIG main screen.
Explains how to adjust Pre Gas, Start Current, and Up Slope.
Covers parameters for AC TIG welding, including Frequency and Balance.
Details Lift Arc and High Frequency start methods for TIG welding.
Describes saving and recalling weld setups to memory.
Covers Brightness, Language, Memory Reset, and Information.
Details connecting the welder to the mains power supply.
Provides basic information and connection steps for Stick welding.
Provides basic information and connection steps for TIG welding.
Lists current ranges for different tungsten electrode diameters.
Describes the operation for HF Start and Lift TIG modes.
Advises on preventing dust buildup and cleaning the power source.
Provides contact information for service agents.
Lists common problems, reasons, and outcomes for inverter models.
Information for qualified service personnel regarding safety.
Presents the circuit diagram for the power source.
Lists parts for the power source assembly.
Lists parts for the TIG torch assembly.
Outlines the warranty terms for Australian customers.
Provides contact details and warranty information for New Zealand customers.
General| Brand | WIA |
|---|---|
| Model | WELDARC 200AC/DC |
| Category | Welding System |
| Language | English |
To Next Page
