98
4 SPECIFICATIONS
Manufactured to Australian Standard AS60974-1
IEC60974-10 6.3.2 6.3.3.
TERM WELDARC 200 AC/DC
Rated Input Voltage 220 - 240 V
Power Frequency 50/60 Hz
Rated Input Capacity 7.5 KVA
Generator Capacity 10 KVA
Rated Maximum Supply Current Imax 20 A
Maximum Effective Supply Current Ieff 12 A
Output No Load Voltage 81 V
Supply Main Circuit Breaker 25 A
Supply Cable 2.5mm2 & Plug Rating 15 A
Extension Lead Rating 15 A
VRD Safe 12 V
Rated Output @ 40°C
Stick MMA 160 A @ 26.4 V 30% Duty
88 A @ 23.5 V 100% Duty
TIG 200 A @ 18 V 30% Duty
110 A @ 14.4 Volts 100% Duty
Current Up Slope Time 0 - 10 S
Current Down slope Time 0 - 15 S
Pulse Frequency DC: 0.2-500 Hz
AC: 0.2-20 Hz
Pulse Ratio Width Adjustment 10 - 90 %
AC Balance Control, Negative 50 - 85 %
AC Frequency 50 - 150 Hz
Arc Force Control MMA 0 - 100 %
Arc Start MMA 0 - 100 A
Post Gas Time 1 - 60 S
Pre Gas Time 0 - 5 S
Cooling Type Fan on Demand
Efficiency ≥ 80% n
Power Factor 0.99 Cos§
To Next Page
Loading...
