Wickes PSC1904.1 - Maintenance and Troubleshooting; Tool Maintenance; Troubleshooting Common Issues; Environmental Protection

16
Remove the plug from the socket before carrying out any adjustment, servicing or maintenance.
Your power tool requires no additional lubrication or maintenance. There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth. Always store your
power tool in a dry place. Keep the motor ventilation slots clean. Keep all working controls free of dust. Occasionally you
may see sparks through the ventilation slots. This is normal and will not damage your power tool.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied persons in
order to avoid a hazard.
1. If your power tool does not start, check it is plugged in, switched on and the fuse is intact.
2. If your power tool use in low efciency, check the tool speed and type of accessory.
3. If a fault can not be rectied, return the tool to an authorized dealer for repair.
MAINTENANCE
TROUBLESHOOTING
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.