Need help?Do you have a question about the Wickes BMS2101 and is the answer not in the manual?
Describes safe working environment practices for power tools.
Covers safe handling of power sources, plugs, and cords.
Emphasizes user alertness, protective equipment, and attire.
Details safe operation, maintenance, and tool selection.
Stresses secure clamping, proper positioning, and avoiding contact.
Covers blade approach, hand placement, and workpiece stability during cuts.
Includes clearing debris and cutting single workpieces.
Ensures secure placement and adequate support for long/wide workpieces.
Details handling jammed blades, achieving speed, and stopping procedures.
Recommends correct blades and performing test cuts before use.
Identifies parts of the mitre saw using diagrams and reference numbers.
Lists optional items and recommended purchases for the mitre saw.
Provides key performance, electrical, and dimensional data for the tool.
Explains symbols for reading manual, warnings, and required PPE.
Covers electrical waste recycling and hand safety precautions.
States weighted sound pressure and power levels for the tool.
Explains factors affecting actual noise and minimizing user risk.
Defines the saw's purpose and its cutting capabilities.
Details connecting dust collectors or using the provided dust bag.
Guides on attaching support bars for longer workpieces.
Explains how to fit and use the workpiece clamp for secure cutting.
Provides instructions for bolting the saw to a workbench for stability.
Describes how to lock and unlock the saw head for transport or operation.
Details how to set and lock mitre angles using the table lock knob.
Explains how to set and lock bevel angles using the bevel lock knob.
Explains how to use the button to lock the blade for maintenance.
Step-by-step guide to safely start the saw and begin cutting operations.
Instructions for cutting across the grain of the workpiece.
Instructions for angled cuts along the mitre axis.
Instructions for angled cuts along the bevel axis.
Instructions for combined mitre and bevel cuts.
Guides on checking and adjusting mitre and bevel zero points for accuracy.
Detailed steps for safely removing and installing new saw blades.
Advice on responsible disposal of electronic waste and recycling options.
Step-by-step guide for wiring a replacement power plug.
Lists directives and standards the product conforms to for regulatory purposes.
General| Blade Diameter | 210mm |
|---|---|
| Bore Size | 30mm |
| No Load Speed | 5000 RPM |
| Max Cutting Depth at 90 degrees | 70mm |
| Bevel Angle | 0 - 45 degrees |
| Dust Extraction | Yes |
| Cable Length | 2 m |
| Blade Included | Yes |
| Type | Mitre Saw |
| Power Source | Electric |
To Next Page
