To Next PageTo Next Page
Need help?Do you have a question about the Wigam P2 Series and is the answer not in the manual?
General| Model | P2 Series |
|---|---|
| Category | Water Pump |
| Power Source | Electric |
| Voltage | 230V |
| Frequency | 50 Hz |
| Discharge Tube Diameter | 1 inch |
| Inlet/Outlet Size | 1 inch |
Essential safety measures for operating high vacuum pumps, covering handling refrigerants and electrical grounding.
Provides detailed technical specifications for WIGAM high vacuum pumps, including swept volume and operating temperatures.
Explains the function of the gas ballast valve in preventing vapor condensation and aiding pump starting.
Details the mandatory process of filling the pump with the correct oil before initial operation.
Discusses optimizing suction hose length and the use of check/solenoid valves for vacuum efficiency.
Covers options for discharge connection, including using an oil trap plug for specific operating conditions.
Explains electrical supply requirements, three-phase pump rotation checks, and thermal protection.
Covers grounding the motor pump and safely locating the unit to prevent burns or damage.
Outlines the mandatory steps before the first run and subsequent starting procedures.
Details how to properly stop the pump, including shutting off suction and purging with gas ballast.
Discusses the recommended oil types (mineral vs. synthetic) and replacement intervals for pump lubrication.
Provides a step-by-step guide for draining and refilling the pump with fresh oil to maintain performance.
Explains when to perform extraordinary maintenance and the need for skilled staff for disassembly.
