To Next PageTo Next Page
Need help?Do you have a question about the Wigam P2D and is the answer not in the manual?
Summarizes essential safety points for operating and handling vacuum pumps, including personal protection and environmental care.
Provides key specifications for WIGAM high vacuum pumps, including swept volume, ultimate vacuum, power, and operating temperatures.
Explains the function of the gas ballast valve, which aids starting and prevents vapor condensation in the lubricant.
Details the mandatory procedure for filling the pump with the correct type and amount of oil before operation.
Discusses suction connection best practices for efficient vacuum pull and optional check valve integration.
Covers discharge connection options, including free air discharge or using an oil trap plug for specific applications.
Covers electrical connection requirements, rotation check, thermal protection, grounding, and general placement precautions.
Outlines the correct steps for starting and stopping the vacuum pump, including pre-operation checks and shutdown sequences.
Details the recommended oil types, viscosity, and the schedule for lubrication and oil changes for pump longevity.
Describes when to perform extraordinary maintenance and notes that disassembly is for skilled staff only.
Instructions on how to order spare parts by specifying the pump model and the reference number of the required part.
General| Power | 550W |
|---|---|
| Flow rate | 50L/min |
| Frequency | 50 Hz |
| Inlet/Outlet Size | 1 inch |
| Voltage | 220-240V |
