Version 1.6 Updated on 7/1/2023
10 AUDIO INPUT VIA LINE IN OR SPDIF IN
WiiM Pro can be used as the preamplifier and network audio transmitter via Wi-Fi or
Ethernet. You can stream the analog audio input from a CD player, vinyl recorder, TV or
computer to another (or multiple) WiiM Pro or Mini connected device.
To set up the WiiM Pro with the line-in input:
1. Plug the line-in cable into the LINE IN port on the back of the WiiM Pro.
2. Plug the other end of the cable into the record player.
3. In the WiiM Home app, Go to Browse > Select source on device > LINE IN,
and select the LINE IN for the source of the audio distribution.
4. Create a multiroom music group with your WiiM Pro. On WiiM Home app, Go
to Devices, and select the WiiM Pro connected with your LINE-IN device. Tap
the group button (with a "link" icon in a box) at the top right corner of the device
box. Select the WiiM Pro you wish to transmit the audio.
Once completed, the music from the device plugged into the WiiM Pro will play to your
multiroom music group.
You can do the same for the SPDIF input port of WiiM Pro if your source device has
the digital audio output via SPDIF.
You can also enable “Autosense” on the WiiM Pro to automatically play your Line-In
or Optical-In source when WiiM Pro detects a signal. You can enable this feature from
the WiiM Home App.
WiiM Pro has a built-in EQ to process the audio input based on your taste. You can
also control the audio volume in the App remotely without adjusting your audio input.
Some source devices may require a preamp. For example, some turntables do not
have a preamp built-in, so you will need to connect your turntable to an external
preamp and then connect the preamp to WiiM Pro.
To Next Page
Loading...
