WiiM Pro - 5. HOW TO SET UP; 5.1 CONNECT YOUR SYSTEM

Version 1.6 Updated on 7/1/2023
Connected to network
White
Solid
BT mode, paired
Green
Solid
Aux-in mode
Green
Solid
OTA
White, Green
Flashing (slow)
Restore to factory setting
White, Red
Flashing (slow)
Not connected to the network (and not in
setup mode)
Red
Solid
Faulty Error
Red
Flashing (slow)
NOTES:
WGR: Three-color LED, no color mix
W: Wi-Fi as the audio source (product default mode)
G: Audio source from Analog, digital audio input, or BT
R: Error (Not connected to a network or faulty error)
Three modes: Solid, flashing slow, flashing fast
5. HOW TO SET UP
5.1 CONNECT YOUR SYSTEM
① If you’re connecting to an audio/video receiver (AVR), DAC, or amplifier via its Line
out, Optical out, or Coaxial out;
or
② If you’re connecting to powered speakers or soundbar directly via its Line Out,
Optical out, or Coaxial out;
or
③ If you're connecting to a TV, vinyl, or MP3 player via an audio input port such as
Line in or Optical in, then to a speaker via digital or analog audio output