1.
General information
■
Bimetal thermometers described in these operating
EN
instructions have been designed and manufactured using
state-of-the-art technology. All components are subject to
stringent quality and environmental criteria during production.
Our management systems are certified to ISO 9001 and
ISO 14001.
■
These operating instructions contain important information on
handling the instrument. To ensure safe operation, all safety
instructions and operating instructions must be observed.
■
Observe the local accident prevention regulations and general
safety regulations, in effect for the instrument's range of use.
■
The operating instructions are part of the instrument and must
be kept in the immediate vicinity of the instrument and readily
accessible to skilled personnel at any time.
■
Skilled personnel must have carefully read and understood
the operating instructions prior to beginning any work.
■
The manufacturer's liability is void in the case of any damage
caused by using the product contrary to its intended use, non-
compliance with these operating instructions, assignment of
insufficiently qualified skilled personnel or unauthorised
modifications to the instrument.
■
The general terms and conditions contained in the sales
documentation shall apply.
■
Subject to technical modifications.
4 WIKA operating instructions, models 53, 54, 55 (ATEX)
To Next Page
Loading...
Need help?
General
