Bimetal thermometers contain no internal heat source, and, when
correctly installed and operated, cause no increase in temperature!
EN
2.4 Special hazards
CAUTION!
Observe the information given in the applicable type
examination certificate and the relevant country-specific
regulations for installation and use in potentially
explosive atmospheres (e.g. IEC 60079-14, NEC, CEC).
Non-observance can result in serious injury and/or
damage to property.
For additional important safety instructions for
instruments with ATEX approval, see chapter 2.3
“Additional safety instructions for instruments per ATEX”.
CAUTION!
Residual media in the dismounted instruments can
result in a risk to persons, equipment and the
environment. Take sufficient precautionary measures.