WIKA CPG1200 - Page 60

60 WIKA operating instructions, model CPG1200
EN
14603921.02 06/2023 EN/DE
11. Specifications
11.1 Specifications for CPG1200
Basic information
Accuracy
1)
■
0.5 % FS
2)
■
0.25 % FS
2)
Non-repeatability (per
IEC 61298-2)
≤ 0.1 % FS
2)
Long-term stability (per
IEC 61298-2)
≤ 0.2 % FS
2)
Connection location Vertical mounting position, process connection lower mount
Adjustment Offset and span factor adjustable
Functions
Menu functions
■
Min./Max. alarm (visual)
■
Power-off function
■
Measuring rate
■
Level indication
■
Tare offset
■
Indication damping
Memory
■
Min./Max. memory
■
Integrated data logger
Data logger
■
Automatic recording of up to 1,000,000 values;
■
Interval
⇒
Selectable from 1 ... 3,600 s in 1-second steps or
⇒
Selectable with the measuring rate in the following
steps: 1/s, 2/s, 4/s, 10/s
Battery status display Icon display with 4 bars indicates the battery status in 25 %
steps.
Case
Material Case PBT with 30 % glass fibre
Protective case cap VMQ (silicone)
Dimensions See dimensions in mm [in]
Ingress protection IP65
Weight
3)
Incl. batteries
■
Standard: 350 g
■
ATEX: 363 g
With protective case
cap
■
Standard: 440 g
■
ATEX: 453 g
1) Including non-linearity, hysteresis, zero offset and end value deviation (corresponds to measured error per IEC 61298-2).
2) FS = Full span = end of measuring range - start of measuring range
3) Weight determined with a G ½ process connection. With other process connections, the weight can differ from the values
specified here.
11. Specifications