Need help?Do you have a question about the WIKA CPG1000 and is the answer not in the manual?
General| Protection Class | IP65 |
|---|---|
| Accuracy | 0.25 % FS |
| Display | LCD |
| Communication | RS485 |
| Output signal | 4-20 mA |
| Process connection | 1/4" NPT |
| Electrical connection | M12 connector |
| Material | Stainless steel |
Explains symbols used in the manual for warnings and information.
Defines the intended applications and proper usage of the CPG1000.
Provides specific safety guidelines for ATEX-certified operation.
Details potential risks and hazards associated with the instrument's use.
Covers electrical hazards and specific conditions required for safe operation.
Details technical specifications for sensor technology, including ranges and accuracy.
Outlines specifications for the base instrument, display, functions, material, and power supply.
Lists relevant approvals and certificates for the CPG1000, including CE and CSA.
Provides detailed tables of available measuring ranges and their corresponding resolutions.
General description of the CPG1000's features and capabilities.
Details the front panel layout, display, and operational buttons.
Explains the use of external voltage supply and battery power.
Covers the RS-232 interface and process connection details.
Guidelines for checking for damage during transport and proper packaging procedures.
Specifies permissible storage conditions and factors to avoid for the instrument.
Instructions for turning the instrument on/off, zeroing, and using MAX/MIN functions.
Explains how to navigate and adjust instrument settings via the configuration menu.
Details configuration options like pressure units, power-off, damping, sampling rate, and tare function.
Describes how to access and use the supervisor mode for locking/unlocking parameters.
States that the CPG1000 is maintenance-free, with repairs only by manufacturer.
Provides safety precautions and instructions for cleaning the instrument.
Recommends regular recalibration by the manufacturer every 12 months.
Lists common indications, their causes, and recommended troubleshooting measures.
Safety instructions for safely disconnecting the instrument from the system.
Guidelines for safely packaging and shipping the instrument for return.
Recommendations for environmentally compatible disposal of the instrument and packaging.
Lists available connection adapters and equipment for pressure generation.
Lists software for data logging and installation accessories like mounting flanges.
Covers other optional accessories such as certified accuracy and external power supply connections.
Presents the EC declaration confirming conformity with essential protection requirements and tested standards.
Details the EC type examination certificate, including equipment description, ATEX marking, and test standards.
To Next Page
