WIKA CPG1000 - Base Instrument Specifications

WIKA operating instructions model CPG1000 13
11568047.02 08/2012 GB/D
GB
3. Specications
Base instrument
Indicator
Display 5 1/2 digit display, character size 16.53 mm (0.65")
20 segment bargraph, 0 ... 100 %
Pressure units psi, bar, mbar, Kg/cm², inH
2
O (4 °C, 20 °C or 60 °F), ft H
2
O (4 °C, 20 °C or
60 °F), cmH
2
O (4 °C and 20 °C), mH
2
O (4 °C and 20 °C), kPa, MPa, inHg,
mmHg, TORR, mSW, ft SW, user-dened unit
Functions
Measuring rate 0.5/sec. to 10/sec. selectable
Memory MIN/MAX, integrated data logger
Data logger
4)
Cyclic logger: automatic recording of up to 8,500 values;
Cycle time: selectable from 1 ... 3,600 sec. in the following steps
1 sec., 2 sec., 5 sec., 10 sec., 30 sec., 1 min, 2 min, 5 min, 10 min, 30 min and
1 h
Material
Wetted parts stainless steel 316
Case stainless steel
Voltage supply
Power supply 3 x 1.5 V AA alkaline batteries
Battery life approx. 1,500 h without backlighting
approx. 2,000 h at lower measuring rate
Battery status indication Icon in display for low battery level
Permissible ambient conditions
Operating temperature -10 ... +55 °C
Medium temperature
-10 ... +55 °C (lower temperature limit above the freezing point of the medium)
Storage temperature -20 ... +70
Relative humidity < 95 % r.H. (non-condensing)
Communication
Interface USB, RS-232
Case
Dimensions 111 x 127 x 38 mm
Ingress protection IP 65
Weight approx. 455 g