Need help?Do you have a question about the WIKA CPG500 and is the answer not in the manual?
General| Type | Digital Pressure Gauge |
|---|---|
| Protection Class | IP 65 |
| Display | LCD |
| Units | bar, psi, MPa, kPa |
| Output signal | 4-20 mA, RS485 |
| Process connection | G 1/4, G 1/2, 1/4" NPT |
| Electrical connection | M12 connector |
| Storage temperature | -20 to +70 °C |
| Material | Stainless steel |
Explains the meaning of warning, caution, and information symbols used in the manual.
Defines the CPG500's specific application and limitations for safe operation.
Specifies the required skills and training for operating personnel.
Highlights specific risks associated with the CPG500, including media compatibility.
Provides a brief overview of the CPG500's features, including Min/Max display and accuracy.
Lists the items included with the CPG500 digital pressure gauge upon purchase.
Details the device's display, bargraph, and the function of each key.
Explains how to access and configure settings like Auto Power Off and unit selection.
Provides instructions on connecting the CPG500, including torque specifications.
Guidelines for checking the CPG500 for damage after transport.
Instructions on handling and keeping the original packaging for protection.
Details permissible storage conditions and factors to avoid for the CPG500.
Information on the device being operational upon receiving it with fitted batteries.
Step-by-step guide on how to safely replace the device's batteries.
Describes the power-on sequence, self-test, and initial display modes.
Instructions for properly shutting down the CPG500 digital pressure gauge.
Procedure for activating the display backlight and its automatic shut-off.
How to view and use the minimum and maximum pressure values recorded.
Explanation of how the Full Scale (FS) value is displayed for readability.
Procedure for clearing the stored minimum and maximum pressure readings.
Indicates when the applied pressure is outside the full scale range.
Guide to manually correcting the zero point when no system pressure is applied.
How to deactivate zero point correction by turning the device off and on.
Configuration options for automatic device shutdown to save battery power.
Procedure for selecting and changing the pressure units (bar, PSI, kPa, MPa).
How to adjust filter settings for damping effects on the pressure reading.
How to view the device's serial number and software version.
States that the CPG500 is maintenance-free, except for battery replacement.
Instructions for safely cleaning the digital pressure gauge with a moist cloth.
Recommendation for periodic recalibration and the scope of factory checks.
Procedure for safely disconnecting the gauge from the system after depressurization.
Guidelines for safely returning the CPG500, including packaging and labeling.
Instructions for environmentally compatible disposal of the instrument and packaging.
To Next Page
