8 Dismounting, return and disposal
WARNING!
Residual media in dismounted digital pressure gauge can result in a risk to persons,
the environment and equipment. Take sufficient precautionary measures.
8.1 Dismounting
Only disconnect test- and calibration installations once the system has been depressurised!
8.2 Return
WARNING!
Strictly observe when shipping the CPG500 digital pressure gauge:
All instruments delivered to WIKA must be free from any kind of hazardous substances
(acids, bases, solutions, etc.).
When returning the digital pressure gauge, use the original packaging or a suitable transport
package.
To avoid damage:
1. Wrap the CPG500 digital pressure gauge in an antistatic plastic film.
2. Place the CPG500 digital pressure gauge, along with the shock-absorbent material, in the
packaging. Place shock-absorbent material evenly on all sides of the shipping box.
3. If possible, place a bag, containing a desiccant, inside the packaging.
4. Label the shipment as transport of a highly sensitive measuring instrument.
Enclose the completed return form with the CPG500 digital pressure gauge.
The return form is available on the internet:
www.wika.de / Service / Return
8.3 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in an environmentally compatible way
and in accordance with the country-specific waste disposal regulations.
To Next Page
Loading...
Need help?
General
