To Next PageTo Next Page
Need help?Do you have a question about the WIKA TR10-B and is the answer not in the manual?
General| Accuracy | ±0.5 °C |
|---|---|
| Sensor Type | PT100 |
| Sensor element | Platinum |
| Accuracy class | Class A |
| Protection class | IP65 |
| Material | Stainless steel |
| Measurement Range | -50 to 200 °C |
| Connection | 3-wire |
| Process connection | G1/2" or NPT1/2" |
Explanation of WARNING and CAUTION symbols used in the manual.
Details on safe operation, intended use, and restrictions for the thermometers.
Defines the system operator's responsibilities for thermometer selection and safe operation.
Requirements for skilled electrical and operating personnel for safe handling.
General guidelines for mechanical mounting of thermometers.
Precautions regarding short circuits during electrical connections.
Guidelines for 3-A compliant connections and approved process connections.
Requirements for EHEDG conform connections and recommended sealings.
Mounting instructions for EHEDG certified and 3-A conform instruments.
Troubleshooting steps for cases with no signal or broken cables.
Causes and measures for incorrect readings due to temperature or chemical effects.
Addressing low readings, slow response times, and mounting geometry issues.
Safety warnings and procedures for cleaning the instrument.
Recommended intervals for recalibration of measuring inserts.
Safety warnings and procedures for dismounting instruments, especially concerning residual media and heat.
