EN
1. General information / 2. Design and function
14150915.07 11/2020 EN/DE/FR/ES
WIKA operating instructions, models TRxx and TCxx4
1. General information
Ϯ
The thermometers described in the operating instructions have been manufactured
using state-of-the-art technology.
Ϯ
These operating instructions contain important information on handling the instrument.
Working safely requires that all safety instructions and work instructions are observed.
Ϯ
Observe the relevant local accident prevention regulations and general safety
regulations for the instrument's range of use.
Ϯ
Skilled personnel must have carefully read and understood the operating instructions
prior to beginning any work.
Ϯ
Subject to technical modifications.
Ϯ
Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: see chapter 10 “Specifications”
- Application consultant:
Tel.: +49 9372 132-0
Fax: +49 9372 132-406
info@wika.de
2. Design and function
2.1 Description
These resistance thermometers and thermocouples are used for temperature
measurement in industrial applications.
This document describes instruments in standard version. For applications in hazardous
areas special instrument versions are required.
For further information for operation in hazardous areas, see the additional information for the
corresponding ignition protection type (separate document).
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
Models concerned:
϶
These operating instructions are valid for a whole range of products. For a detailed listing
of these models see chapter 10 “Specifications” (page 28).
To Next Page
Loading...
Need help?
General
