WIKA PSD-4 User Manual

14208834.01 07/2017 EN/DE/FR/ES
7WIKA operating instructions pressure switch, model PSD-4
EN
3. Safety
3. Safety
3.1 Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result in serious injury or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in light injuries or damage to property or the
environment, if not avoided.
WARNING!
... indicates a potentially dangerous situation that can result in burns caused by hot surfaces or liquids,
if not avoided.
Information
... points out useful tips, recommendations and information for ecient and trouble-free operation.
3.2 Intended use
The instrument has been designed and built solely for the intended use described here, and may only be used
accordingly.
The manufacturer shall not be liable for claims of any type based on operation contrary to the intended use.
Intended use
The PSD-4 pressure switch is used for the switching of circuits as a function of the measured pressure. In addition, the
pressure value can be output to appropriate read-out units as a standardised analogue signal. The switching conditions
can be programmed directly at the pressure switch (switch and reset points, ...). Via the dierent display elements,
switching statuses and pressure values can be read.
This is a class B instrument for emissions and is intended for use in industrial environments. In other environments,
e.g. residential or commercial installations, it can intefere with other equipment under certain conditions. In such
circumstances the operator is expected to take the appropriate measures.
MAKGIL VIET NAM

WIKA PSD-4 Specifications

General

Brand	WIKA
Model	PSD-4
Category	Switch
Language	English