WIKA SERIES DW User Manual

INSTRUCTION MANUAL
NI-209WE
Rev. 8 12/16
DIFFERENTIAL PRESSURE SWITCHES SERIES DA & DW
All data, statements and recommendations supplied with this manual are based on information believed by us to be reliable. As the conditions of
effective use are beyond our control, our products are sold under the condition that the user himself evaluates such conditions before following our
recommendations for the purpose or use foreseen by him.
This document is the property of ALEXANDER WIEGAND SE &Co and may not be reproduced in any form, nor used for any purpose other than
that for which it is supplied.
WEATHERPROOF AND INTRINSICALLY SAFE: MODELS DW
FLAMEPROOF: MODELS DA
Versions: DW40, DW100 e DW160
Versions: DA40, DA100 e DA160
A Low pressure connection
B High pressure connection
C Cable entry V Vents
Weight 6,2 kg (dimensions in mm)
A Low pressure connection
B High pressure connection
C Cable entry V Vents
Weight 7,2 kg (dimensions in mm)
Versions: DW10
Versions: DA10
A Low pressure connection
B High pressure connection
C Cable entry
Weight 8,2 kg (dimensions in mm)
A Low pressure connection
B High pressure connection
C Cable entry
Weight 10 kg (dimensions in mm)
For surface mounting use four screws M6 .
NOTE: dimensions and weights are not binding unless released on certified drawings.
CAUTION
 Before installing, using or carrying out maintenance on the instrument it is necessary to read and understand the indications given in
the attached Instruction Manual.
 The instrument must only be installed and maintained by qualified personnel
 INSTALLATION IS TO BE CARRIED OUT ONLY AFTER CHECKING THAT INSTRUMENT CHARACTERISTICS ARE
CONSISTENT WITH PROCESS AND PLANT REQUIREMENTS.
 The functional features of the instrument and its degree of protection are shown on the identification plate fixed to the case.
CONTENTS:
1. GENERAL NOTES
2. OPERATING PRINCIPLE
3. MODEL CODE
4. IDENTIFICATION PLATE AND MARKINGS
5. SET POINT REGULATION
6. SET POIT CALIBRATION
7. MOUNTING AND CONNECTIONS
8. INSTRUMENT PLUMBING
9. SAFETY INTEGRITY LEVEL (SIL) INSTALLATION REQUIREMENTS
10. PUTTING INTO OPERATION
11. VISUAL INSPECTION
12. FUNCTIONAL VERIFICATION
13. STOPPING AND DISMOUNTING
14. DISPOSAL
15. TROUBLESHOOTING
SAFETY INSTRUCTIONS FOR USE IN HAZARDOUS ATMOSPHERES.
RECOMMENDATIONS FOR PRESSURE SWITCH SAFE USE.
RELATED DOCUMENT
To authenticated document with certificate
N° IECEx PRE 16.0068X
N° IECEx PRE 16.0074X

WIKA SERIES DW Specifications

General

Brand	WIKA
Model	SERIES DW
Category	Switch
Language	English