Need help?Do you have a question about the WIKA PSD-30 and is the answer not in the manual?
General| Materials (wetted parts) | Stainless steel |
|---|---|
| Process connection | G 1/4, G 1/2, 1/4" NPT, 1/2" NPT |
| Protection class | IP65 |
| Operating temperature | -20 ... +80 °C (-4 ... +176 °F) |
| Ambient temperature range | -20 ... +80 °C (-4 ... +176 °F) |
| Media temperature range | -20 ... +80 °C (-4 ... +176 °F) |
| Housing material | Stainless steel |
Specifies the intended application of the pressure switch for converting pressure to electrical signals.
Details the necessary qualifications and training for personnel handling the instrument.
Highlights potential risks associated with hazardous media and residual media.
Details switching outputs (PNP/NPN) and analog signals (4-20mA, 0-10V), including IO-Link.
Details accuracy specifications for analog signals, switching outputs, and display.
Details procedures for making the mechanical connection, including sealing and torque.
Explains earthing, power supply requirements, and connection diagrams for electrical hookup.
Guides on checking and resetting the zero point for different pressure measuring ranges.
Describes system start, display/programming modes, and the functions of the device keys.
Lists and describes various parameters for configuring the pressure switch settings.
Explains the hysteresis and window functions for output switching behavior.
To Next Page
