EasyManua.ls Logo

wiking Miro 4 - Chimney Function and Sweeping; Type Badge and Serial Number Location

wiking Miro 4
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 13 of 24 pages
Chimney
The chimney is the “engine” of the stove and it is crucial for the functioning of the woodburning
stove. The chimney draft provides a partial vacuum in the stove. This vacuum removes the
smoke from the stove, sucks air through the dampers for the so-called glass pane rinse which
keeps the glass free of soot, and sucks in air through both primary and secondary dampers
for the combustion.
󰀨
The higher the temperature within the chimney, the greater the draft. It is crucial, therefore, that
the chimney is warmed up properly before closing the damper and limiting the combustion in the
On days where the wea-
󰀩


If the stove has not been used for a longer period, it is important to check that the chimney pipe
is not blocked.

check the applicable rules.
Chimney sweeping

󰀪
the chimney is too tall to be cleaned from above, it must be equipped with a soot door.

have the chimney checked by the chimney sweeper.
The type badge and the serial number (Drawing C)
On WIKING Miro 1/Miro 2 the type badge and serial number are glued onto an extension plate
located in the left side next to the locking hook.
On WIKING Miro 3/Miro 4/Miro 5/Miro 6 the type badge and the serial number are placed on
the inside of the door below the combustion chamber.

Other manuals for wiking Miro 4

Related product manuals