the lens part (Clarity Adjustment)
2. Check the condition of the lens surface and color display, please clean them if necessary.
3. In low light conditions, activate the IR lamp
Technical Maintenance
Technical maintenance should be done at least twice a year, includes the following steps
1. Clean the outside metal and plastic surfaces from dust, dirt and moisture, wipe the lens and glass with
a soft lint free cloth
2. Clean the battery compartment’s electric contact points using an oil-free solvent
3. Inspect the Glass and lens and gently blow off any dust and sand, or clean them with a soft and clean
cloth.
4. Keep device far away from humid environment
Customer Contact:
Email: support@wildguarder.com
Website: www.wildguarder.com
COPYRIGHT© 2020 WILDGUARDER OUTDOORS
To Previous Page
Loading...