Wildix W-AIR Headset - Call Hold and LED Indicators; Call Hold and Retrieval; Ending a Call; LED Indicators Overview

Hold
Put a call on hold/ Retrieve a call:
 Press Call button for 2 seconds to put a call on hold/ retrieve a call. The voice prompt will
announce "Call unhold"/ "Call retrieved"
End a call
End an active call:
 Press Call button to end a call
LED indicators Overview
Color
LED indication
Status
Green
Short blink followed by long blink
Power Up
Fast short blink, repeated
Incoming call
Fast short blink, repeated
2-nd incoming call, call active, Silent
mode on
Single short blink. Notification of call only via
audio in HS
2-nd incoming call, call active,
Silent mode off
Single short blink
In call
Long blink
Battery charging
Steady on
Battery charging, full
Red
Long blink followed by short blink
Power Down
Fast, short blink
Low battery
Steady on
Battery charging, low battery
Long blink
Registration failed
Single short blink repeated slow
Idle, out of range
Blue
Short blink repeated fast
Registration, ongoing
Long blink
Registration completed
Single short blink repeated slow
Idle, connected
Purple
Steady on
Menu
None
Deregistered