4. Charging
Open the rubber plug Insert the charging plug in Fill and fix the rubber
plug after charging
2. One foot stands on the pedal and the other
foot slide on the ground.
3. When the electric scooter begins to glide, the
other foot shall step on the pedal and then the
throttle switch shall be gently pressed when the
foot is stable.
5. Driving learning
Always wear a helmet and safety gear to
avoid injury during driving, as shown in the
figure.
1. Turn the power on and check the battery indicator.
4. Loose the throttle switch to reduce the speed
slowly, grasp the brake handle on the front of
the left handlebars tightly for emergency brake.
5. Tilt the body weight toward the turning
direction lightly and slowly rotate the handle.
To Next Page
Loading...
