7
OPERATION INTRODUCTION FOR CONTROL PANEL
Name of control panel
ON/OFF button
Sleep button
Fan button
Fan speed indicator
Timer button
Mode button
Fan mode indicator
Dry mode indicator
Cool mode indicator
Dual-8 nixie tube
+ / - button
Health indicator(Optional)
Operation of control panel
NOTICE:
• After connecting the air conditioner to the power supply it will sound a beep. After that,
you can operate the air conditioner by the control panel.
• Under ON status, after each pressing of the button on control panel, the air conditioner
will give out a sound. Meanwhile, corresponding indicator on control panel will be bright.
• Under OFF status, dual-8 nixie tube on control panel won’t display.
Under ON status, dual-8 nixie tube on control panel will display set temperature. Under
another mode it won’t display.
1. ON/OFF button
Pressing this button will turn on or turn off the air conditioner.
2. + / - button
Under cooling mode, press “+” or “-” button to increase or decrease the
temperature by 1°C (°F). Set temperature range is 16°C~30°C Under drying or
fan mode, this button is invalid.
3. Mode button
Press this button and the mode will circulate according to below sequence:
COOL→DRY→FAN
– COOL: Under this mode, cooling mode indicator is bright. Dual-8 nixie tube
displays set temperature. Temperature setting range is 16°C~30°C.
– DRY: Under this mode, drying mode indicator is bright. Dual-8 nixie tube
won’t display.
– FAN: Under this mode, the air conditioner only blow fan. Fan indicator is
bright. Dual-8 nixie tube won’t display.
To Next Page
Loading...
Need help?
General
