8
4. Fan button
Press this button and the fan speed will circulate as “low speed→ medium
speed → high speed → auto fan → low speed”.
5. Timer
Press timer button to enter into timer setting mode. Under this mode, press "+"
or "-" button to adjust the timer setting. Timer setting will increase or decrease
0.5hour by pressing "+" or "-" button within 10 hours, while timer setting will
increase or decrease 1 hour by pressing "+" or "-" button beyond 10 hours.
After timer setting is finished, the unit will display temperature if there’s no
operation for 5s. If timer function is started up, the upper indicator will keep
the display status. Others, it won’t be displayed. Under timer mode, press timer
button again to cancel timer mode.
6. Sleep
Press sleep button to enter into sleep mode. If the controller operates at
cooling mode, after sleep mode is started up, preset temperature will increase
by 1°C within 1 hour; preset temperature will increase by 2°C within 2 hours
and then the unit will operate at this temperature all the time; Sleep function
is not available for fan mode and drying mode. If sleep function is started up,
theupper indicator will keep the display status.
BUTTONS ON REMOTE CONTROLLER
21
➊
➌
➍
➏
➋
➎
➐
➊
ON/OFF button
➋
MODE button
➌
+/- button
➍
FAN button
➎
X-FAN button
➏
SLEEP button
➐
TIMER button
To Next Page
Loading...
Need help?
General
