Wilo EMU FA+HC20.1 Series User Manual

Product description
3-6 WILO EMU 3.0
Operating point*
Motor data*
Filling quantity/lubricant
Coatings
Suction port: -
Tabelle 3-3:
Q water flow: -
H
man
head: -
Speed: -
Voltage: -
Frequency: 50 Hz
Tabelle 3-4:
Starting current: -
Rated current: -
Rated power: -
Activation type: direct
Cos phi: -
Max. starts per hour: 15 /h
Min. switching break: 3 min
Service factor: 1.00
Operating mode:
Wet installation: S1
Dry installation: -
Explosion coding: -
Explosion number: -
Tabelle 3-5:
Motor chamber: --- ---
Sealing room: - Esso Marcol 82 (White oil)
Cooling system: - Esso Marcol 82 (White oil)
Table 3-6:
Pump: -
Tabelle 3-7:

Wilo EMU FA+HC20.1 Series Specifications

General

Brand	Wilo
Model	EMU FA+HC20.1 Series
Category	Water Pump
Language	English