Wilo Medana CH1-L Series - Scope of Delivery; Accessories; Transport and Interim Storage; Application

en Transport and interim storage
12 WILO SE 02/2022
0.55 50 3 54
0.75 50 3 55
1.1 50 3 55
1.5 50 3 56
1.85 50 3 57
2.5 50 3 58
3 50 3 59
4.2 50 3 61
0.55 60 3 58
0.75 60 3 58
1.1 60 3 59
1.5 60 3 59
1.85 60 3 60
2.5 60 3 61
3 60 3 62
4.2 60 3 64
5.5 60 3 66
0.37 50 1 52
0.55 50 1 53
0.75 50 1 53
1.1 50 1 54
1.5 50 1 56
3.3 Scope of delivery
ƒ High-pressure multistage centrifugal pump
ƒ Installation and operating instructions for the pump
ƒ Installation and operating instructions for the frequency converter
3.4 Accessories
Please consult Wilo catalogue for the list of accessories.
4 Transport and interim storage
When receiving the product, check that it has not been damaged during transport. If
any damage is found, take all necessary measures with the carrier in the time provided.
CAUTION
Risk of material damage
If the delivered material is to be installed at a later date, store it in a dry place and
protect it from impacts and any external influences (humidity, frost etc.). Temperat-
ure range for transport and storage: -30°C to +60°C.
Handle the product with care so as not to damage it prior to installation.
5 Application
This product has been designed to pump hot or cold water, water/glycol mixtures or
other low-viscosity fluids that are free of mineral oil, solid or abrasive substances, or
materials containing long fibres.
CAUTION
Risk of motor heating
A technical opinion is required prior to pumping fluid that is denser than water.
DANGER
Risk of explosion
Do not use this pump to convey flammable or explosive liquids.