Spare parts en
Installation and operating instructions Wilo Motor T 12 ... 72 + EMU FA, Rexa SUPRA, Rexa SOLID 57
11 Spare parts
Spare parts are ordered via customer service. To avoid return queries and incorrect or-
ders, the serial or article number must always be supplied. Subject to change without
prior notice!
12 Disposal
12.1 Oils and lubricants
Operating fluid must be collected in suitable tanks and disposed of in accordance with
the locally applicable guidelines. Wipe up drips immediately!
12.2 Protective clothing
Used protective clothing must be disposed off in accordance with the locally applicable
guidelines.
12.3 Information on the collection of
used electrical and electronic
products
Proper disposal and appropriate recycling of this product prevents damage to the envi-
ronment and danger to your personal health.
NOTICE
Disposal in domestic waste is forbidden!
In the European Union, this symbol can appear on the product, the packaging or the
accompanying documentation. It means that the electrical and electronic products
in question must not be disposed of along with domestic waste.
To ensure proper handling, recycling and disposal of the used products in question,
please note the following points:
ƒ Only hand over these products at designated, certified collecting points.
ƒ Observe the locally applicable regulations!
Please consult your local municipality, the nearest waste disposal site, or the dealer who
sold the product to you for information on proper disposal. Further recycling informa-
tion at www.wilo‑recycling.com.
13 Appendix
13.1 Tightening torques
Rust-free screws A2/A4
Threaded Tightening torque
Nm kp m ft·lb
M5
5.5 0.56 4
M6
7.5 0.76 5.5
M8
18.5 1.89 13.5
M10
37 3.77 27.5
M12
57 5.81 42
M16
135 13.77 100
M20
230 23.45 170
M24
285 29.06 210
M27
415 42.31 306
M30
565 57.61 417
Geomet-coated screws (strength 10.9) with Nord-Lock washer
Threaded Tightening torque
Nm kp m ft·lb
M5
9.2 0.94 6.8
M6
15 1.53 11
M8
36.8 3.75 27.1
M10
73.6 7.51 54.3
M12
126.5 12.90 93.3
To Next Page
Loading...
