Wilo Wilo-E 25/1-5 User Manual

English
7 WILO SE 05/2011
• The pump should be protected from moisture, frost and
mechanical damage due to impact during transport and
interim storage.
• The device must not be exposed to temperatures outside the
range of -10 °C to +60 °C.
4 Intended use
The circulation pumps in the E.../1-5 series are designed for
warm water heating systems and similar systems with con-
stantly changing volume flows. Approved fluids are heating
water in accordance with VDI 2035, water/glycol mixture at a
mixing ratio of max. 30 % of glycol. If glycol is added, the deliv-
ery data of the pump must be corrected according to the higher
viscosity, depending on the percentage mixing ratio.
5 Product information
5.1 Type key
Example: E 25/1-5-130
E Electronic asynchronous pump
25 Threaded connection DN 25 (Rp 1)
1-5 1 = Minimum delivery head in m
(adjustable down to 1 m)
5 = Maximum delivery head in m
at Q = 0 m³/h
130 Length of pump housing 130 mm

Wilo Wilo-E 25/1-5 Specifications

General

Model	Wilo-E 25/1-5
Power Supply	Single-phase
Material	Cast iron
Insulation Class	F
Max Pressure	10 bar
Operating Pressure	10 bar
Fluid Temperature	-10°C to +110°C
Supply Voltage	230 V
Connection Size	1 inch